商品編號：Chino AH4000
- 業界唯一結合記錄紙與記憶體儲存功能的AH3000(100mm)與AH4000(180mm)系列記錄器
- 畫面顯示可切換為單通道/多通道/百分比等混合功能
- 標準附加USB與SD卡，兼顧傳統紙式記錄器使用者的習慣，
- 更能同時將資料電子化，180mm(AH4000)、100mm(AL4000)記錄紙
- 附標準DAQ軟體可輕鬆簡單地在PC上記錄與設定
| INPUT SPECIFICATIONS | |
| Measuring points | 6, 12, 24 |
|
DC voltage: ±13.8mV, ±27.6mV, ±69.0mV, ±200mV, ±500mV, ±2V,±5V, ±10V, ±50V, ±50V DC current: Max 50mA by external shunt resistor (100Ω, 250Ω) (sold separately) Thermocouples: K, E, J, T, R, S, B, N, U, L, W-WRe26, WRe5-WRe26, PtRh40-PtRh20, NiMo-Ni, CR-AuFe, Platinel, Au/Pt Resistance thermometers: Pt100, old Pt100, JPt100, Pt50, Pt-Co |
|
| Accuracy rating | |
| Measuring interval | 1 second/6 points, 2 seconds/12 points, 2 seconds/24 points |
| Input resolution | About 1/40,000 or better (converted to reference range) |
| Reference junction compensation accuracy |
At ambient temperature:23℃±10℃ K, E, J, T, N Platinel---±0.5℃ or EMF 20μV, whichever greater Other than above---±1.0℃ or EMF 40μV, whichever greater |
| Burnout | Burnout detection function for thermocouple input and RTD input. Upper burnout, lower burnout or burnout disabled is selectable for each input. |
| Maximum common mode voltage | 30V AC/60V DC |
| Common mode rejection ratio | 130dB or more (50/60Hz) |
| Normal mode rejection ratio | 50dB or more (50/60Hz) |
| Terminal board | Removable when wiring |
| DISPLAY SPECIFICATIONS | |
| Analog display | LCD bar graph 180mm |
| Digital display | Monographic type LCD (Backlight AUTO / Always ON settable) Dots : 264 x 48 dots Display area : 184 x 22mm |
| Display item | All channels simultaneous display, year/month/day, hour/minute, alarm activate channel, chart speed display of measuring value. |
| Status display | REC, CARD, ALM |
| ALARM DISPLAY | |
| Alarm display | Status display "ALM" flash, measuring value flash at operation screen |
| Alarm types | Absolute alarm, differential alarm, rate-ofchange alarm, FAIL, calendar timer, chart end |
| Alarm settings | Individual settings, Max 4 levels/channel |
| Alarm output |
Mechanical relay 2, 6, 12, 24 points ('a' contact) Mechanical relay 4, 8, 16 points (‘c’ contact) |
| STANDARDS (CONFORMITY PENDING) | |
| CE marking |
EN61326-1 EN61010-1 *Under EMC test condition, variation in indication value is ±20% or ±2mV at maximum, whichever is larger. |
| UL | UL61010-1 2nd edition |
| CSA (C-UL) | CAN/CSA C22.2 No.61010-1-04 |
| Protection | IEC 60529 IP54 |
| RECORDING SPECIFICATIONS | |
| Dotting interval |
5 seconds/point, 2.5 seconds/point Interlock to chart speed |
| Recording method | Wire-dot type 6-color ribbon |
| Record/Printed color | |
| Chart paper |
Fan-fold type Total width 200mm, total length 20m, effective chart width 180mm |
| Chart speed | 1 to 1500mm / h, in 1mm/h increments (12.5mm / h can be set exceptionally) |
| Periodic data printing | Digital printing is added to trace printing at month / day, time, channel no., data, unit Interval (hour/time) arbitrary setting |
| Data printing | When required, interrupt trace printing and digital print time and measuring value |
| Alarm printing |
Alarm activated --- Time, channel no., alarm type and level Alarm reset --- Time, channel no., alarm level Memory capacity --- Max. 48 data |
| List printing | When required, interrupt trace printing and print date, chart speed and setting information of each channel |
| Message printing | Print when required Up to 15 characters/message, register up to 20 characters |
| ON/OFF of display and recording | Select ON / OFF of display per each channel, trace recording to chart, digital recording to chart, recording to SD card |
| Subtract printing | Record difference between reference channel and measuring value or between reference value (set value) and measuring value |
| Zone printing | 2 / 3 / 4 divisions |
| Compressed/Expanded printing | Range limit is made non-linear and specific chart recording lower/upper limit is shrunk or expanded |
| Automatic range shift printing | Recording range is shifted automatically to another set range when measured value exceeds the current range. Overlap function available |
| Skip function | No display or printing of channels of which ranges are not set |
| GENERAL SPECIFICATIONS | |
| Rated power voltage | 100 to 240VAC, 50/60Hz |
| Maximum power consumption |
Max 65VA 100V AC balanced: 22VA 240V AC balanced: 31VA |
| Normal operation condition |
Ambient temperature range: 0 to 50ºC (20 to 65%) Ambient humidity range: 20 to 80%RH (5 to 40ºC) Power voltage:90 to 264V AC Power frequency:50/60Hz ±2% Attitude: forward tilting 0º, backward tilting 0 to 30º, left/right 0 to 10º |
| Case material |
Door --- Aluminum die-casting Front panel --- Glass Case --- Cold-rolled steel plate |
| Case color |
Door--- Black (equivalent of Munsell N3.0) Glass--- Clear and colorless Case --- Gray (equivalent of Munsell N7.0) |
| Mounting | Panel mounting |
| Weight | About 7.6kg |
| Terminal screw |
Power terminal, Protective conductor terminal --- M4.0 Measuring input terminal, alarm output terminal Remote contact terminal --- M3.5 Communication terminal --- M3.0 |
| OPTIONS | |
| Remote contact |
By external relay contact signal (digital contact: short or open), you can select chart speed or data printing Input points: 5 points, 10 points, 20 points Input signal: Digital contact signal or open collector signal Exterior output: 5V DC/2mA Function: 1. Record start/stop 2. Chart speed 3-speed switch 3. Data printing 4. List printing 5. Message printing 6. Operation record (Record ON/OFF condition to the designate location by bar line) 7. Integration/F value reset 8. Memory card (record start/stop) 9. Alarm output rest 10.Time correction |
| Alarm output |
Mechanical relay ('a' contact) 2 points, 6 points, 12 points, 24 points Max. load 100 to 240VAC 0.2A 30V DC 0.2A Min. load 5V DC 10mA Mechanical relay ('c' contact) 4 points, 8 points, 16 points Max. load 100 to 240VAC 0.2A 30V DC 0.2A Min. load 5V DC 10mA |
| Communication interface | RS232C, RS422A, RS485, Ethernet |